铁艺护栏是很容易生锈的。要做好防锈处理，每年定时进行除锈和涂漆，往常也要加强保护，发现有漆脱落，立即补漆。涂漆前要做好除锈，除锈越彻底，漆就越牢。除锈完成后，涂好底漆。底漆是起防锈作用的最重要的工序，对漆的质量要求及涂漆的工艺都有很高的要求。底漆做好后，可以在上面涂面漆。面漆除了加强防锈才能外，主要是美观。

　　Iron railings are prone to rusting. To do a good job of rust prevention, regular rust removal and painting should be carried out every year, and protection should also be strengthened. If paint falls off, it should be repaired immediately. Before painting, it is necessary to remove rust thoroughly. The more thorough the rust removal, the stronger the paint will be. After rust removal is completed, apply the primer. Primer is the most important process for rust prevention, with high requirements for the quality of paint and the painting process. After the primer is done, a topcoat can be applied on top. In addition to enhancing rust prevention, topcoat is mainly for its aesthetic appeal.

　　为延伸野外铁艺设备的寿数，还应做到以下几点:

　　It's rusty. To extend the lifespan of field ironwork equipment, the following points should also be achieved:

　　1.要定时除尘:

　　1. Regularly remove dust:

　　一股说来，在制造过程中厂家已考虑到了野外环境的特色，在资料和涂料的选用上都力求做到防锈、耐要、抗腐蚀，抗曝晒等，所以用户只需在选购铁艺设备时认准知名的厂家，不要食图便宣买一些质量不合格的铁制设备就行了。我厂铁艺护栏的质量优良，保养的好的话是不怎么生锈的。

　　In the manufacturing process, manufacturers have taken into account the characteristics of the outdoor environment, and strive to achieve rust prevention, durability, corrosion resistance, and sun exposure resistance in the selection of materials and coatings. Therefore, users only need to identify well-known manufacturers when purchasing iron equipment, and do not declare the purchase of some unqualified iron equipment based on pictures. The quality of our factory's wrought iron guardrails is excellent, and if well maintained, they will not rust much.

　　野外尘埃飞扬，日积月累，铁艺设备上会落上一层浮尘。它会影响铁艺的色泽，进而导致铁艺保护膜的破损。所以应定时擦洗野外铁艺设备，一般以柔软件的棉织品擦洗为好。

　　Dust flies in the wilderness, and over time, a layer of floating dust will fall on the wrought iron equipment. It will affect the color of the wrought iron, leading to damage to the protective film of the wrought iron. So it is advisable to regularly clean outdoor iron equipment, usually with soft cotton fabrics.

　　2.要注意防潮时把水珠擦干。

　　2. Pay attention to wiping off water droplets when preventing moisture.

　　如果只是一般的野外空气湿度，您可以定心铁艺设备的防镀性。如逢大雾气候，运用干棉布擦洗铁艺上的水珠;若逢雨天，应于雨停后及时把水擦干。

　　If it's just general outdoor air humidity, you can focus on the plating resistance of the wrought iron equipment. If encountering foggy weather, use a dry cotton cloth to scrub the water droplets on the iron work; If it rains, the water should be wiped dry in a timely manner after the rain stops.